Spray Stop Standard and Spray Stop 50+ anti-splash tape is used for applications in the marine & offshore industry. This high-tech laminated multilayer aluminium tape, has been designed by safety specialists in order to prevent spray outs of hazardous liquids (oil / fuel) from tubing systems. These liquids can cause extremely dangerous situations like fires, explosions or other dangerous situations. According to the SOLAS amendment chapter 2-2 regulation, ships are to apply appropriate protection system to prevent leakage and splashing of flammable oil from FO, LO hydraulic and other piping systems.
This product complies with the IMO A653 (16) regulations. Spray Stop standard can be used up to 15 bar pressure, Spray Stop 50+ up to 50 bar pressure.
Click here to oversee all Spray Stop certificates and datasheets.
[table id=6 /]
Max pressure: 15 bar (50 + 50 bar)
Max temperature: +160 ºC continuously,
+200 ºC shortly
Adhesive material tolerance: -70 ~ -200 above
Adhesion: 1000 grams above, 25 mm g/f
Shelf life: 3 years when properly stored
Spray Control protection tape is made of triple layer reinforced Vinyl. The UV stabilized colored material is resistant to sun, rain, and fumes. The material is excellent resistant to most chemicals and to temperatures up to approx. 75 Celsius. In the overview on last page in this catalogue you can view if the Spray Control tape can be used on your equipment & piping systems. As an operator of processinstallations it is stipulated by Law that you have to make sure your factory is a safe environment.
Click here to oversee all Spray Control Tape certificates and datasheets.
T-ISS PipeRep is a special developed resin coated glass fiber cloth, which will set, also under water. The fiberglass cloth tape is impregnated with a water activated resin prior to packaging. Normal setting time is approximately 20 minutes, depending on the temperature. The activator is
normal salt or fresh water. This repair product sets even under water and because of this, it is ideal to use in difficult / wet applications. T-ISS PipeRep can be used for corrosion prevention, reinforcement and electrical protection up to 16,000 volts. PipeRep will retain pressure up to 50bar on supply lines and will function under intermittent temperatures up to 250 degrees Celsius. T-ISS PipeRep is uniquely coloured orange for easy identification of repair zones.
Click here to oversee all Pipe Repair Tape certificates and datasheets.
[table id=7 /]
One pack of T-ISS PipeRep comes with:
● Pipe repair tape
● Pipe repair FastSteel putty
● One pair of protective gloves
● Instruction manual
Extreme weather conditions can cause leakage of your hatch covers, which will lead to the damage of cargo being transported. T-ISS HaCo Blueliner tape keeps moisture out, and ensures a weather and fume tight hatch seal. HaCo Blueliner tape is design by specialists with 20 years of tape experience, to seal out the elements on hatch cover rims. HaCo Blueliner tape has an extraordinary strength, adhesion and is extremely flexible. It can be easily recognized by it’s blue top layer of modified PE material. A material which gives the highest protection under extreme conditions. Regulations regarding hatch covers have evolved since the investigation following the loss of the MV Derbyshire. The Association of Classification Societies increased this strength standard by creating its Unified Requirement § 21 in 1998.
Click here to oversee all Hatch Cover Tape certificates and datasheets.
All HaCo Blueliner tape is tested under practical environment and extreme standards. HaCo Blueliner tape can be installed between -45 and 40 °C, and can withstand -15 to 70 °C. Rolls are 20 meter of self-adhesive SBS bitumen rubber compound, coated to a modified blue PE liner and with a release PE Liner. Shelf life is 24 months when properly stored.
[table id=8 /]
Simple to use. Drip Stop Tape is not using any adhesive components and it will not stick to the hand. Drip Stop Tape is made to stick on its own components, when applying it therefore needs an overlap of half the width. The full cure time is approximately 20 – 30 minutes. Drip Stop can be used even on wet surfaces and pressurized leaking piping up to maximum 3 kg/cm2. It will even cure under water. When being used in wet areas, it must be winded very tightly. Drip Stop can also be used as a protection layer to prevent corrosion, or as electric insulation.
Click here to oversee all Drip Stop Tape certificates and datasheets.
CorStop Zinc tape will prevent galvanic corrosion and protects new and existing steel parts such as bridge supports, pipelines and other marine structures. CorStop is made of a high purity zinc with an high tack self adhesive backing. CorStop zinc tape is being supplied in 25, 50 and 100 wide rolls each 20 meter long.
Click here to oversee all CorStop Zinc Tape certificates and datasheets.
Material: zinc layer (39%)
Thickness: 0,1mm zinc, 0,05 adhesive
Temp. resistance: up to 115°C
Adhesion to steel: >70N/100mm
Shelf life: 12 months
T-ISS HeatStop is a modified basalt fibre with an aluminium layer for heat-insulation, it is 100% environmental and health friendly material. Compared to similar asbestos / glass fiber related products in the market, our HeatStop fibre is environmental friendly material, that is more and more used to replace glass or ceramic fibres. These claims are backed by test reports. Similar products in shipping industry contain fibres which can be damaging for your lungs and general health. The HeatStop tape comes with an modified reinforced aluminium bonding adhesive tape to close the ends of the wrapping. Heat resistance up to 1000 ºC.
T-ISS HeatStop is type approved by BV. Rules for the Classification of Steel Ships Part C, Chapter 4. SOLAS 74 Convention, as amended, Regulation 11-2/3,11-2/5, 11-2/6, 11-2/9 & IMO Resolution MSC.61(67) – FTP Code Annexl, Part 2 & 5, IMO MSC/Circ.1120.
Click here to oversee all Heat Stop Tape certificates and datasheets.
T-ISS RustStop is a corrosion protection tape. This tape makes sure that all kinds of steel structures will be protected against corrosion. The tape provides an excellent resistance to water, acids, alkalies and salts. It is a appropiate long-term solution against corrosion. The tape is solvent free and creates a robust barrier against water. It protects metal surfaces underwater, underground and in the most demanding outdoor conditions. The tape won’t peel, harden or crack. It is very easy to apply and retains its quality under extreme conditions.
Click here to oversee all Rust Stop Tape certificates and datasheets.
1.2 mm x 50 mm x 10 m
1.2 mm x 100 mm x 10 m
T-ISS foam mounting tapes are closed-cell, polyethylene foam, coated with a high tack / high shear acrylic adhesive. They have superior chemical and fuel resistance, and good outdoor weatherability. They also give excellent adhesive performance in the area of tack, sheer and adhesion. High tack permanent adhesive with excellent ageing and weather resistant properties specifically designed for mounting and joining nameplates, plastic trim, signs and emblems. Long term bonding performance to plastic hangers and mirror mounting. Used on board of cruiseliners, tankers, ferries, etc. to install signage or to fix products to a flat surface.
Click here to oversee all Foam Tape certificates and datasheets.